|
  
Calibration and Measurement Capability
Aeroflex has one of the widest ranges of technical capability available in the UK. Our industry leading laboratories are able to calibrate and repair over 25,000 different types of electrical, mechanical, pressure, temperature and special-to-type instrumentation.
Listed below are our core capabilities and some of the most common equipment types that we regularly calibrate. The list is not exhaustive though, so if you can't find your instrument type listed, please contact us and we will be happy to provide you with a quotation.
DC & LF Calibration Services
Capability
- DC voltage to 100kV
- AC voltage to 30kV
- Current to 200A (1000 ampere turns for clamp meters)
- Resistance from 100µO to 10TO
- Capacitance from 10pF to 10 µF
- Inductance from 1µH to 10 H
Typical DC and LF Instruments Calibrated
Multifunction calibrators
AC power analysers
Power factor meters
Digital multimeters
Standards multimeters
LCR component bridges
Counter/ timers
Audio analysers
Frequency response analysers
PCM test sets
Safety testers/pat testers
Surface resistance meters
Logic analysers
Level measuring test sets
Chart recorders
Temperature Calibration Services
Capability
- -40° C to 650° C
- rh 4 points between 20% and 90% rh
Typical Temperature Instruments Calibrated
Temperature indicators with probes
Thermocouples
Thermal hygrographs
Chart recorders
Mass and Pressure Calibration Services
Capability
- Pressure calibration services
- Precision scales to 30kg
- Air pressure up to 69 bar
- Hydraulic pressure up to 1400 bar
- Vacuum 1 x10-3 in Hg
- Dew point to -50°C
Typical Mass and Pressure Instruments Calibrated
Pressure gauges and indicators
Manometers
Vacuum gauges
Weights
Precision scales to 30kg
|
RF & Microwave Calibration Services
Capability
We cover the RF frequency spectrum up to 50GHz
Typical RF & Microwave Instruments Calibrated
Signal generators
RF/Microwave frequency counters
Spectrum analysers
Radio test sets
Scalar analysers and detectors
Network analysers
Modulation meters
Measuring receivers
EMC receivers
Power sensors/meters
RF millivoltmeters
Attenuators
Terminations
Directional bridges
Couplers
Waveguide components up to WG22 (40 GHz)
Amplifiers
Optical Measurements Calibration Services
Typical Optical Instruments Calibrated
Optical power meters
Safety microscopes
Optical sources
Visible light sources
Laser power/energy meters
Mechanical Calibration Services
Capability
- Linear dimension 0 to 600mm
- Torque 0 to 100Nm
- Thread 0.5mm to 600mm
- Diameter 0 to 600mm
- Slips 0.5mm to 100mm
- Angular 0 to 45°
- Pressure 0 to 1200 bar
- Pull off tester for full crimp tool calibration and evaluation
Typical Mechanical Instruments Calibrated
Micrometers
Vernier callipers
Vernier depth gauges
Vernier height gauges
Dial gauges lever and plunger
Plug and ring gauges
Angle plates and box angles
Inspection fixtures
Torque wrenches
Torque screwdrivers
Force gauges
Crimp tools
|
|
